Ultra BOND GOLD EX-420

0 out of 5 based on 0 customer ratings
(0 customer reviews)

ULTRA BOND GOLD EX-420 is a polymer-modified cement-based quick set tile adhesive specially designed for heavy-duty application for fixing ceramic tiles, marbles, granites, slabs, sand-stones, porcelain, glazed tiles internal use), and large size quarry tiles on both interior and exterior floor and wall surfaces. GOLD EX-420 is also used in areas like industrial plants, swimming pools, bathrooms, stairs, heated-floors, in parking slots, etc. Vastly suggested for the exterior walls and floor surfaces because of its high resistance capacity against sunlight and long pot life.

POLYMER MODIFIED TILE & STONE ADHESIVE

Polymer modified, thin bed and middle bed adhesive for application of ceramic tiles, vitrified tiles and natural stones on wall & floor in interior and exterior applications.

CHARATERICSTICS

  • For ceramic, vitrified (Semi and fully) tiles, glass mosaic, and natural stones (Non sensitive).
  • On balconies, terraces, wet rooms and bath rooms.
  • On water proof moisture proof layers.
  • For interior and exterior use.
  • Longer open time for safer applications.
  • Highly deformable

SCOPE OF USE

  • Adhesive mortar for laying large format tiles and stone for interior and exterior.
  • Adhesive mortar can be used in room exposed to water. Recommended for swimming pools and wet areas

COLOR    : Grey / White

ACHIEVED THIKNESS     : Up to 10 mm

COMPLIANCE / STANDARDS  : C2T as per EN 12004 / ISO 13007 / S2                                                                          Standard Type 2T as per IS 15477-2019 standard

COVERAGE

As per guide line: 1.2 kg/M2/mm of thickness consumption may be vary depend up on the evenness on substrates

ULTRA BOND GOLD EX-420 1 bag contains 20 kg/ 3.72m² in 3 mm thickness.

DIRECTION OF MIXING:

Mix 20Kg (1 bag) of Ultra BOND GOLD EX-420 with 5 liters of clean water. Stir the mixture well to obtain a lump-free smooth compound. Make the surfaces free from dust and any greasy substances as it reduces the bonding strength. During the process at the site, the quantity of water shall be adjusted to get the desired consistency. Stir well to get the homogeneous paste. It can be done by hand or slow speed electric drill with a speed of less than 300 rpm. Allow tiling to set for 24 hours before grouting or any foot-traffic

INSTALLATION:

Apply Ultra BOND GOLD EX-420 on the substrate around 1 m² at a temperature of 23°C within 25 minutes. It is good to keep a minimum of a 2mm gap around the tiles. After 25 minutes, an outer skin forms, preventing the tile from adhering with the adhesive properly. So any adjustments on the tiles shall be done on or before the open-time. Grouting of the tile joints shall be done after 24 hours only using / ultrapoxy epoxy grout/Ultra Joint Filler EX-20. Cured materials are to be removed mechanically with proper tools. Clean the tools with water after each use.

PRECAUTION:

The tile adhesive Ultra BOND GOLD EX-420 contains cement powders. When it mixes with water, alkalis are released, which harm our skin. Hence during the process, extreme ventilation is suggested in those areas. When products are handled, protect hands and eyes using gloves and goggles. Treat any splashes to the skin or eyes with fresh water immediately. For any emergency situations, medical assistance should be taken without wasting time. Ensure the availability of the product container for the examinations of any relevant instructions and content details.

KEY BENEFITS

  • Easy & Ready to Mix
  • Economical
  • Heavy-duty Applicant
  • Specially designed for exterior Floors and walls
  • Excellent bond strength
  • High flexibility & compression strength
  • Polymer modified cement-based quickset compound
  • Highly recommended for exterior areas
  • Exceptional resistance capacity over hot weather
  • High shock & impact resistance

APPLICATION AREAS:

ULTRA BOND GOLD EX-420 is a polymer-modified cement-based quick set tile adhesive specially designed for heavy-duty application for fixing ceramic tiles, marbles, granites, slabs, sand-stones, porcelain, glazed tiles internal use), and large size quarry tiles on both interior and exterior floor and wall surfaces. GOLD EX-420 is also used in areas like industrial plants, swimming pools, bathrooms, stairs, heated-floors, in parking slots, etc. Vastly suggested for the exterior walls and floor surfaces because of its high resistance capacity against sunlight and long pot life.

AVAILABLE PACK SIZES   20Kg

PRODUCT SPECIFICATIONS

Color      : Grey / White

Storage     : Above 20°C with unopened package

Shelf life    : 12 months from the date of production

Pot life     : 45 minutes

Time for foot traffic     : 24 hours

Nature     : Smooth & creamy

Reviews

There are no reviews yet.

Be the first to review “Ultra BOND GOLD EX-420”

Your email address will not be published. Required fields are marked *